帕剌斯

Two Highlights Make Qingdao University Choose Palas® Again

Palas® MFP Nano plus Filter Test Rig helps Qingdao University in HEPA/ULPA filter media testing

MFP filter test rigs from Palas® have been widely recognized by university research teams, and Qingdao University is one of them. After the Palas® MFP 3000 G was praised by the College of Physics, the university’s State Key Laboratory of Bio-Fibers and Eco-Textiles chose again the Palas® MFP Nano plus HEPA/ULPA Filter Media Test Rig — thanks to its measurement of fraction separation efficiency in the 15 nm to 300 nm size range and accurate determination of most penetrating particle size (MPPS). Palas® will continue to help Qingdao University face the challenges of filtration tests and promote further scientific research in the future.

Challenge of filtration tests for universities

Challenge of filtration tests for universities

The State Key Laboratory of Bio-Fibers and Eco-Textiles is the driving force of the Shandong textile industry. When it comes to measuring the fraction separation efficiency and the MPPS of HEPA/ULPA filters by following EN 1822-3, the laboratory encountered a challenge. Because the data provided by most filter media test rigs is based on the particle’s mass concentration. It does not contain information on particle size, neither on MPPS. However, EN 1822-3 and ISO 29463-3 for HEPA/ULPA filters both require the measurement of fraction separation efficiency, meaning the particle number-based filtration efficiency under different particle sizes. In addition, the scatter-light test rigs cannot measure the 100 nm-smaller particles, and the resolution of the particle size channel is relatively low. Normally, the MPPS of common air filter media range is between 30 nm and 300 nm, so only an instrument that can perform well within the core range can help the Qingdao University laboratory meet the challenge.

Palas® solution helps solve smoothly

Palas® solution helps solve smoothly

In response to the requirements from Qingdao University, Palas® arranged onsite inspection, timely communication and provided Palas® MFP Nano plus Filter Media Test Rig as solution. In accordance with EN 1822-3 and ISO 29463-3, the Palas® MFP Nano plus is equipped with U-SMPS for fraction separation efficiency test ranging from 15 nm to 300 nm. In addition, the MFP Nano plus provides up-to-42 particle size channels in that core size range with powerful Palas® hardware and software combination. This further enables accurate determination of the location of MPPS.

迎刃而解的Palas®解决方案

Palas® 's knowledge of HEPA/ULPA filters and localized after-sales service add significant value to the Palas® MFP Nano plus Filter Media Test Rig. The state key laboratory of Qingdao University finally chose Palas® MFP Nano plus after consideration. The lab also recoginized the Palas® solution in the actual application process. Palas® will continue to provide proven and reliable solutions for HEPA/ULPA filter filtration research.

Palas® MFP Nano plus HEPA/ULPA Filter Media Test Rig

Palas® MFP Nano plus HEPA/ULPA Filter Media Test Rig

Palas® MFP Nano plus HEPA/ULPA Filter Media Test Rig

Filter media test rig in accordance to DIN EN 1822-3 and ISO 29463-3 for fraction separation efficiency and determination of MPPS of filter media.

Advantages

Particle size measurements from 10 nm

Internationally comparable measurement results in accordance with DIN EN 1822-3 and ISO 29463-3

Simple use of different test aerosols, such as NaCl or DEHS (others on request)

Easily movable dilution cascades with factors of 10, 100, 1,000 and 10,000 for measurements with salt or DEHS

Simple measurement of the fraction separation efficiency and determination of the MPPS range

High reproducibility of the testing method

Flexible filter test software FTControl

Easy to operate, even untrained personnel can be instructed quickly in the use of the equipment

Cleaning can be performed autonomously by the customer

Short set-up times

Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing and upon delivery

Reliable operation

Low maintenance

The unit will reduce your operating costs

Applications

For filter media and small filter elements

Product development and production control

Test possibilities with regard to EN 1882-3 (HEPA/ULPA) and ISO 29463-3

Fractional efficiency measurement in the range from approx. 10 nm up to 800 nm

Palas® will arrange a series of online webinars both in English and Chinese for Ambient air quality continuous monitoring system, SMPS scanning mobility particle size spectrometer, Promo® aerosol spectrometer, Aerosol generator and Dilution system, ISO 16890 filter media test rig-MFP 3000 G, ISO 29463-3 HEPA/ULPA filter media test rig-MFP Nano plus 4000, ISO 17536 oil mist separator filtration performance test rig-HMT 1000, as well as many other aerosol measurement solutions. You are welcome to register for the conference and will be informed of the webinar information as soon as possible!

March 1st, 2023: 9:00 (AM) / 4:00 (PM) (CET)
Two in one solution for filter element testing in accordance with different standards

Have you ever considered testing both room air filters (ISO 16890) and high-efficiency particulate air filters (ISO 29463) by ONE testing system only? Various filter types and sizes are to be tested under multiple conditions by a unique dual filter testing system by Palas GmbH.No need to worry about your budget and lab size limitations anymore, the dual filter testing system is designed to FIT IN!

Learn more about this topic in our webinar with Tomas Prokop

Please register here!

帕剌斯仪器(上海)有限公司
Palas Instruments (Shanghai) Co., Ltd.
上海市松江区顺庆路6506C5层, 邮编: 201612
5th Floor, Building 6C, No. 650 Shunqing Rd, Song Jiang District, 201612 Shanghai
热线/Hotline:+86 400 784 6669
电子邮箱/Email:info@palas.com.cn
网站/Website:www.palas.com.cn

关注帕剌斯仪器

This email was sent to [EMAIL] by Ringier Trade Media Ltd. © 2023 | Industrysourcing.com © 2023
Unit 20B, 20/F., 235 Wing Lok Street Trade Centre, 235 Wing Lok Street, Sheung Wan, Hong Kong
Unsubscribe | Privacy Policy | Change your Email
Please add Newsletter@ringiermail.com to your mail safelist (whitelist) to ensure our emails reach your inbox. You are receiving this email as an Industrysourcing.com subscriber or registered website user, relevant trade show attendee or industry professional. The industrial information featured in this email is sponsored and is not produced by Industrysourcing.com’s editorial staff.
For more information on cooperation, please contact us (852)23698788